Siempre Technology Private Limited
Lake Town, Kolkata, West Bengal
GST No. 19ABACS1754P1ZT
Call 08048981742 53% Response Rate
Rubber Injection Moulding Machine
30 Tons Liquid Silicone Rubber Injection Moulding Machine, 1530 Kg/cm2
| Clamping Force | 30 Tons |
| Injection Pressure | 1530 kg/cm2 |
| Injection Volume | 100 cm3 |
| Heating Platen Size | 400 x 300 mm |
| Machine Type | Liquid Silicone |
| Daylight Gap | 350 mm |
| Stroke Length | 300 mm |
| Motor Power | 6.3 kW |
| Condition | New |
| Country of Origin | Made in India |
| Screw Barrel Diameter | 26 mm |
In comparison to compression or transfer moulding, rubber injection moulding generates products with a shorter cycle time. Rubber injection moulding allows for the creation of customised shapes with minimal waste or flash. Before being pressed into cavities, the material is heated. This lowers the material's viscosity, making it easier to flow into the cavities.
The uncured rubber is extracted into the machine via a screw feeding mechanism during the rubber injection moulding process. The screw feeder feeds in precisely the right amount of material to make the appropriate number of components. Rubber is fed into a heated barrel from a hopper, then forced into a heated chamber by a screw-type plunger.
Applications:
- Vehicle parts
- Electronics parts
- Medical goods
- Food products
Additional Information:
- Item Code: JY-250ST
View Complete details
45 Tons Vertical Type Slide Table Silicone Rubber Injection Moulding Machine, 1171 Kg/cm2
| Clamping Force | 45 Tons |
| Injection Pressure | 1171 kg/cm2 |
| Injection Volume | 81 cm3 |
| Heating Platen Size | 400 x 400 mm |
| Machine Type | Vertical |
| Daylight Gap | 350-400 mm |
| Motor Power | 7.5 HP |
| Dimension | 1.8 x 1.15 x 3.08 m |
| Condition | New |
| Country of Origin | Made in India |
| Screw Diameter | 30 mm |
Specifications:
| Model | Units | JY-450ST-W | |||
| Injection System | Screw Diameter | mm | 30 | 32 | 35 |
| Injection Pressure | Kg/cm2 | 1171 | 996 | 810 | |
| Theoretical Shot volume | cm3 | 81 | 92 | 117 | |
| Max. Shot Weight(P.S) | g | 74 | 84 | 106 | |
| Safe shot weight(PS) | Oz | 2.6 | 3 | 3.8 | |
| Max. shot weight(ps) | cm3/sec | 62.5 | 71 | 95 | |
| Injection rate | Mm | 115 | |||
| Screw speed Max | rpm | 0-190 | |||
| Nozzle contact force | Tons | 4.45 | |||
| Nozzle retraction force | Mm | 190 | |||
| Temperature Control | ZONE | 3 | |||
| Clamping System | Clamping Force | T | 45 | ||
| Platen Size | mm | 400×400 | |||
| Distance Between Tie Bare | mm | 410×250 | |||
| Min Mold Height | mm | 200/150 | |||
| Opening Stroke | mm | 200 | |||
| Max. Open Daylight | mm | 400/350 | |||
| Ejector Force | T | 1.5 | |||
| Ejector stroke | mm | 135 | |||
| Power & Heading System | Max. Hydraulic Pressure | Kg/cm2 | 140 | ||
| Pump Output | L/min | 37.2 | |||
| Oil reservoir capacity | L | 130 | |||
| Cooling water consumption | l/hr | 600-800 | |||
| Pump Motor Power | Kw/HP | 5.5/7.5 | |||
| Barrel Heating Power | Kw | 2.8 | |||
| Total Wattage | Kw | 9 | |||
| Others | Machine Dimensions(L*W*H) | m | 1.8*1.15*3.08 | ||
View Complete details
EXPLORE MORE CATEGORIES