Siempre Technology Private Limited

• DEG-3L Bottle Blow Machine  is used to produce 0.1~2L cooking oil bottles, mineral water bottles, carbonated bottles, soft drinks bottle, detergent bottles etc.
• Produce bottle from 0.1L to 2L(2 cavity)
• Output capacity up to 1000bph for 0.5L using two-cavity blow mold (one blower & one heater)
• Advanced PLC control system with a use-friendly panel and time-control precision of PLC up to 0.01second
• Equipped with special designed air storage unit
• Using Infrared preform heater
• Independent Temperature Control for different heating lamp to get ideal preform heating results
• Heating lamps are adjustable in directions to suit various preforms.
• Operated only by one person without special training.
• Simple installation & start up adjustment.
• Waste rate of finished bottle is less than 0.1%

Additional Information:

• Item Code: DEG-3L

• The screw adopts high potency melt to make sure the material well mixed.
• Adopt frequency control of motor system to reduce the power consumption.
• Adopt horizontal movement frame to improve stability and speed.
• The oil cylinder is in the center of the mold board, uniform stress for quality products and increase life time.
• High stench guild rod controller the mold open and clamp, to enhance the steadily and high efficiency.
• The extrusion head use spreader or screw type to well mixed the thickness and easy to change different color.
• Advanced design to eliminate the melt material degrade in the runner, to avoid the perform draw-down and the welding line.
• The precise time control system assured good quality, suitable weight and reduces production cycle.
• Freely to move the extrusion foundation backward or forward to make the exchange of  the mold easy.
• Multi-function bottom blowing type for shaped products.
• The mechanical arm can take out the product automatically.

Additional Information:

• Item Code: DEG-30L-S

• The screw adopts high potency melt to make sure the material well mixed.
• Adopt frequency control of motor system to reduce the power consumption.
• Adopt horizontal movement frame to improve stability and speed.
• The oil cylinder is in the center of the mold board, uniform stress for quality products and increase life time.
• High stench guild rod controller the mold open and clamp, to enhance the steadily and high efficiency.
• The extrusion head use spreader or screw type to well mixed the thickness and easy to change different color.
• Advanced design to eliminate the melt material degrade in the runner, to avoid the perform draw-down and the welding line.
• The precise time control system assured good quality, suitable weight and reduces production cycle.
• Freely to move the extrusion foundation backward or forward to make the exchange of the mold easy.
• Multi-function bottom blowing type for shaped products.
• The mechanical arm can take out the product automatically.

Additional Information:

• Item Code: DEG-5L-D

• The screw adopts high potency melt to make sure the material well mixed.
• Adopt frequency control of motor system to reduce the power consumption.
• Adopt horizontal movement frame to improve stability and speed.
• The oil cylinder is in the center of the mold board, uniform stress for quality products and increase life time.
• High stench guild rod controller the mold open and clamp, to enhance the steadily and high efficiency.
• The extrusion head use spreader or screw type to well mixed the thickness and easy to change different color.
• Advanced design to eliminate the melt material degrade in the runner, to avoid the perform draw-down and the welding line.
• The precise time control system assured good quality, suitable weight and reduces production cycle.
• Freely to move the extrusion foundation backward or forward to make the exchange of the mold easy.
• Multi-function bottom blowing type for shaped products.
• The mechanical arm can take out the product automatically.

Additional Information:

• Item Code: DEG-12L-D

• The screw adopts high potency melt to make sure the material well mixed.
• Adopt frequency control of motor system to reduce the power consumption.
• Adopt horizontal movement frame to improve stability and speed.
• The oil cylinder is in the center of the mold board, uniform stress for quality products and increase life time.
• High stench guild rod controller the mold open and clamp, to enhance the steadily and high efficiency.
• The extrusion head use spreader or screw type to well mixed the thickness and easy to change different color.
• Advanced design to eliminate the melt material degrade in the runner, to avoid the perform draw-down and the welding line.
• The precise time control system assured good quality, suitable weight and reduces production cycle.
• Freely to move the extrusion foundation backward or forward to make the exchange of the mold easy.
• Multi-function bottom blowing type for shaped products.
• The mechanical arm can take out the product automatically.

Additional Information:

• Item Code: DEG-30L--S

Additional Information:

• Item Code: IMM-01
• Pay Mode Terms: L/C (Letter of Credit)
• Port of Dispatch: chennai
• Production Capacity: 4000pcs/hr
• Delivery Time: within 45 days
• Packaging Details: will fully wood box packed ,machine covered by plastic film

• DEG-20L 20 l pet bottle blow molding machine is suitable to produce 7-20L water buckets, drinking water bottles or big capacity cooking oil bottles, etc.
• Produce bottle from 7L to 20L(1 cavity)
• Output capacity up to 80bph for 20L using one-cavity blowing mold (one blower & one heater)
• Advanced PLC control system with a use-friendly panel and time-control precision of PLC up to0.01second
• Equipped with special designed air storage unit
• Using Infrared preform heater
• Independent Temperature Control for different heating lamp to get ideal preform heating results
• Heating lamps are adjustable in directions to suit various preforms.
• Operated only by one person without special training.
• Simple installation & start up adjustment.
• Waste rate of finished bottle is less than 0.1%

Additional Information:

• Item Code: DEG-20L

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),Other
• Production Capacity: 1000pcs/hr
• Delivery Time: within 25 days
• Packaging Details: will be fully covered with Plstic film and tightly packed inside wood box.

• The screw adopts high potency melt to make sure the material well mixed.
• Adopt frequency control of motor system to reduce the power consumption.
• Adopt horizontal movement frame to improve stability and speed.
• The oil cylinder is in the center of the mold board, uniform stress for quality products and increase life time.
• High stench guild rod controller the mold open and clamp, to enhance the steadily and high efficiency.
• The extrusion head use spreader or screw type to well mixed the thickness and easy to change different color.
• Advanced design to eliminate the melt material degrade in the runner, to avoid the perform draw-down and the welding line.
• The precise time control system assured good quality, suitable weight and reduces production cycle.
• Freely to move the extrusion foundation backward or forward to make the exchange of the mold easy.
• Multi-function bottom blowing type for shaped products.
• The mechanical arm can take out the product automatically.